- Small diameter vessel
- Extra long fire tube
- Extra long coil bundle
- Increases heat transfer surface area
- More even heat distribution
- Eliminates hot spots
- Closer proximity to coil bundle
- Increases combustion efficiency
- Reduces fuel gas consumption
- Lowers stack temperature
- Eliminates effects of harmonics which helps prevent premature failure
- Easier to service
- More efficient fuel utilization
- Increased burner tube life
|
- Fewer coil turns
- Reduces pressure drop
- Improves heat transfer
-
- Easy to remove and install
- Reduces downtime
- Easily adjustable for changing well conditions
- External piping for serviceability
- Removable for repair or replacement
- Hinged flame arrestor
- Emergency high temperature control
- Low fluid level control
- Safety gas scrubber with high liquid level shut in
|
| 250 M BTU |
2000 M BTU |
3,000 psi |
| 500 M BTU |
3000 M BTU |
6,000 psi |
| 1000 M BTU |
4000 M BTU |
10,000 psi |
| 1500 M BTU |
5000 M BTU |
|
* Actual size requirements will depend upon well and produced gas conditions. Contact your representative to determine your exact needs.
† Larger sizes to fit your needs.
‡ available with any burner size.
INDIRECT (LINE) HEATER (IH) STANDARD EQUIPMENT
Removable Coil Assembly Split
60/40% With Long Nose Adjustable
Choke Connection installed between
Split with Hammer Bar Union.
Removable Firetube and Stack Assembly.
1" 6,000 PSIG WP Supply Gas Pre-Heat Coil
One 0-250° 3" Dial Face Back Connected
Thermometer with Thermowell.
Two Fisher Regulators.
| 24" X 7'-6" |
|
250,000 |
|
| 30" X 10' |
|
500,000 |
|
| 36" X 12' |
|
750,000 |
|
| 42" X 15' |
|
1,000,000 |
|
| 48" X 15' |
|
1,250,000 |
|
| 48' X 17'-6" |
|
1,500,000 |
|
Long Nose Choke Assembly.
Safety Fuel Gas Scrubber 125 PSIG WP With Relief Valve and Pressure Gauge.
Two Kimray T-12 Temperature Controls with Fuel Valves, One for Normal Operation, One for High Temperature Operation in case of failure.
All equipment mounted on a Structural Steel Skid with Interconnecting Piping and Fittings.
* Options are priced based on 1 MM BTU/HR, 3,000 lb. Coil Bundle. Options for other sizes can be priced upon request.
|
